Komatsu — WHEN REQUIRED

. MAINTENANCE MAINTENANCE PROCEDURE CLEAN INSIDE OF COOLING SYSTEM WARNING The coolant has the important function of preventing corrosion as well as preventing freezing. Even in the areas where freezing is not an issue, the use of antifreeze coolant is essential. Komatsu machines are supplied with Komatsu Supercoolant (AF-NAC). Komatsu Supercoolant (AF-NAC) has excellent anticorrosion, antifreeze and cooling properties and can be used continuously for 2 years or 4000 hours. As a basic rule, we do not recommend the use of any coolant other than Komatsu genuine supercoolant (AF-NAC).

If you use another coolant, it may cause serious problems, such as corrosion of the engine and aluminum parts of the cooling system. 4 - 25 Immediately after th e engine i s stopped, t he coolant is at a high temperature and th e radiator is under high internal pressure. If the cap is r emove d to drain t he coolant in this conditio n, there is a hazard o f burns. Wait for the temperature to go down, then turn t he cap slowly to release the pressur e before removing it. When starti the the loc movin For d etails o f starti ng the engi ne, see "BEFORE STARTING ENGINE (PAGE 3-109)" and "STARTING ENGINE (PAGE 3-128)" in the O PERATION se ction.

There is danger of t ouching th e fan if the undercover i s left remove Never enter behind the machi ne when the engine is ru nning ck position to he machine from Stop th e machine o n level gr ound when cleaning o r changing the Clean t he inside of t he coolin g system, change the coolant according to the t able below. Antifreeze coolant Interval for cleaning inside of cooling system and changing antifreeze coolant Komatsu supercoolant (AF-NAC) Every two years or every 4000 hours whichever comes first