23.
MAINTENANCE SCHEDULE CHART SERVICE ITEM EVERY 50 HOURS SERVICE Drain water, sediment from fuel tank 3-42 EVERY 250 HOURS SERVICE Lubricating 3-43 (For hydraulic angle - tiltdozer) l Angle - tilt frame center pin (1 point) 3-43 l Brace pin (2 points) 3-43 l Lift cylinder bottom pin (2 points) 3-43 l Lift cylinder head pin (2 points) 3-43 l Angle - tilt frame support pin (2 points) 3-44 l Angle cylinder head pin (2 points) 3-44 l Tilt cylinder head pin (1 point) 3-44 l Tilt cylinder bottom pin (1 point) 3-44 l Angle cylinder bottom pin (2 points) 3-44 (For hydraulic tiltdozer) l Lift cylinder york (8 points) 3-44 l Lift cylinder head pin (2 points) 3-44 l Tilt cylinder head pin (1 point) 3-44 l Tilt brace pin (2 points) 3-44 l Center brace pin (4 points) 3-44 Check oil level in final drive case, add oil 3-45 Check oil level in hydraulic tank, add oil 3-45 Check level of battery electrolyte 3-46 Check fan belt tension, adjust 3-46 Check electric wirings 3-47 EVERY 500 HOURS SERVICE Replace fuel filter cartridge 3-48 Change oil in engine oil pan, replace engine oil filter cartridge 3-50 Clean, check radiator fins 3-52 3-l 9