7. PRECAUTIONS DURING OPERATION AWARNING: Failure to follow these safety precautions may lead to a serious accident. 7.1 BEFORE STARTING ENGINE SAFETY AT WORKSITE Before starting the engine, thoroughly check the area for any unusual conditions that could be dangerous. Before starting the engine, examine the terrain and soil conditions of the worksite. Determine the best and sa- fest method of operation. Make rough terrain areas as level as possible before operation. If you need to operate on a street, protect pedestrians and cars by designating a person for worksite traffic duty or by installing fences around the worksite.
If water lines, gas lines, and high-voltage electrical lines may be buried under the worksite, contact each utility and identify their locations. Be careful not to sever or cut any of these lines. Check the depth and flow of water before operating in water or crossing a river. NEVER be in water which is in excess of the permissible water depth. Permissible water depth 4 See “12.9.2 PERMISSIBLE WATER DEPTH”. FIRE PREVENTION l Thoroughly remove wood chips, leaves, paper and other flammable things accumulated on the engine compartment. They could cause a fire. l Check fuel, lubrication, and hydraulic systems for leaks. Have any leaks repaired.
Wipe up any excess oil, fuel or other flammable fluids. Check ooints -, See “12.1 CHECKS BEFORE STARTING ENGINE”. l Be sure a fire extinguisher is present and working. l-7