Komatsu — AIR CONDITIONER

. OPERATION EXPLANATION OF COMPONENTS METHOD OF OPERATION 3 - 96 COOLING OPERATION 1. Press main power switch (1) of power ON. 2. Press fan switch (2) and set the 3. Press temperature control sw monitor to COOL (A). 4. Press air conditioner switch ( switch ON. 5. Press RECIRC/FRESH selecto 6. When the temperature inside temperature control switch an desired temperature. the air conditioner to turn the air flow to "Hi". itch (3) and set the display 1. 2. 3. 4. 5. 6. 1. 2. Press fan switch (2) and set the Press temperature control sw monitor to COOL (A). Press air conditioner switch ( switch ON. 4) to turn the air conditioner 5. Press RECIRC/FRESH selecto r switch (5) to select RECIRC. 6.

When the temperature inside the cab goes down, use the d the fan switch to set to the temperature control switch an desired temperature. REMARK I f th e temperature control switch is p ressed to set the display monitor to COOL (A ) and the ai r condition er is run with the air flow at "Lo" for a long period , there is a slight risk that the evaporator will freeze. I f it f reezes and no cold air comes o ut, turn the air conditioner switch OFF, raise t he tempera ture settin g, run th e air conditioner with the air flow at "Hi " for a short time, then turn the air conditioner switch ON again. HEATING OPERATION 1. Press main power switch (1) of power ON. 2. Press fan switch (2) and set the 3.

Press temperature control sw monitor to HOT (A). 4. Press RECIRC/FRESH selecto 5. When the temperature inside temperature control switch an desired temperature. the air conditioner to turn the air flow to "Hi". itch (3) and set the display 1. 2. 3. 4. 5. 1. 2. Press fan switch (2) and set the Press temperature control sw monitor to HOT (A). Press RECIRC/FRESH selecto r switch (4) to select FRESH. 5. When the temperature inside the cab goes up, use the d the fan switch to set to the temperature control switch an desired temperature. REMARK The heating uses the heat from the engine cooling water, so it is effective only w hen the co oling wate r is hot.

DRYING-HEATING AND DEMISTING OP ERATION the air conditioner to turn the 1. 2. 3. 4. 5. 1. Press main power switch (1) of power ON. 2. Press fan switch (2) and set the air flow to the desired setting. Press temperature control swit ch (3) and set to the desired temperature. Press RECIRC/FRESH selecto r switch (4) to select FRESH. 5. Press air conditioner switch (5) to turn the air conditioner ON. REMARK Whe n the outside temperature is be low 0°C (32°F), the air conditioner (compressor) may n ot operate