Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION CHECK COOLANT LEVEL, ADD COOLANT WARNING CAUTION than usual, check for 3 - 103 Do not open the radiator cap unless necessary . When checking t he coolant , always wait fo r the engine to cool down and check the sub-tank. Immediately aft er the engine is stopped, the c oolant is at a high temperatu re and th e radiator is under h igh internal pressure. If the cap is rem oved to check the coolant lev el in this condition, there is a hazard of bu rns. Wait for t he temperature to go down, then turn the cap slowly to release the pressure and remove it carefully. When adding cool ant, use the step and handrail provided. Support your bod y securel 1.

Open cover ( 1) of the platform on the rig ht side of the machine. 2. Check that t he coolant level is betwee n the FULL and LOW marks on ra diator sub-tank (2). If the c oolant level is low, add coolant thro level. ugh the coolant filler of sub-tank (2) to the FULL coolant, tighten the cap securely. 3. After adding coolant, tighten the cap se 4. If sub tank (2 ) is empty, check for coola nt leakage, then check the coolant l evel in the r adiator. If the c oolant level is low, add coolant to th e radiator, t hen add coolan t to sub tank (2) . If the volum e of coolan possible leak Confirm that there is no oil in the coola