Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION CHECK WATER SEPARATOR WARNING and is at the bottom. is water. 3 - 105 Each part o f the engine is still hig hly heated immediately a fter the engine i s stopped. Do not atte mpt to drain cooling w ater or remove the filter element cup. High press ure is generated inside the engine fuel piping, w hile the engine is running. Wait for mo re than 30 seconds aft er the engine sto p for the engine to suffi ciently cool down. Then start with drain ing cooling water or rem oving the filter elemen t cup. Do not brin Check wate r separator, drain wa 1. Open th e engine side cover on the right side of the machine. The wat 2.

It is pos sible to judge the transparent cap condition of water an through (3). If wate r or s ediment accumul ated, set a container under drain hose (4) to discharg ed water. 3. Loosen plug (2) and drain th 4. Tighten drain ho (Tighten ing torque: 0.2 - 0.4 5 Nm {0.02 - 0.046 kg 5. On this machine, sensor is i nstalled to detect if wa ter is accumulated at the bottom o If water separator caution la mp on the machine m onitor lights u p, carry out the abov e Steps 1 - 4 to dra in the