Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE or oil cooler, and then insert the jet 4 - 30 When the ehin the radiato aftercooler (1), nozzle through t remove bo he opening lt (4) to c and lean plat the f e (3) ins. NOTIC If the s team j et nozzle i s broug ht too close to th e radiator fins, it may damage the fins , so keep the nozzle a suitable distan ce away from t he fins whe Work under the following r ough condition Injection pressure : Max. 9.8 MPa (100 kg/cm Nozzle d iameter: Max. 2 mm (0.1 in) Distance between nozzl e and radiator fins: Min . 100 mm (3.9 1420 PSI) Examine th e rubber hoses, and i f any hos e is c racked o r deteriorated, repla ce it.

Check also that there are n o loose hose clamp