. MAINTENANCE SERVICE PROCEDURE CHECK FOR LOOSE ENGINE HIGH-PRESSURE PIPING CLAMPS, HARDENING OF RUBBER CHECKING FOR MISSING FUEL SPRAY PREVENTION CAP, HARDENING OF RUBBER 4 - 66 Check visuall y and touch by hand to check that the re is no hardening of the rubber and no loos e bolts o f the mounting clamps (1 places) for the high-pressurepipin g between the supply pump and the common rail. I f ther e are any problems , the parts must be replaced. In this case, please ask your Komatsu distributor to carry out the carry replacement.
The fuel s pray prevention caps (14 places) on the fuel injection piping and both ends of the high-pressure pipin g act to prevent the fuel f rom coming into contact with high- temperature parts of the engine and causing a fire if the fuel should lea k or spra y out. Check visually and touch by hand to check that there are no missing caps, loose bo lts or hardening of t he ru bber. If there are any problems, the parts must be replaced. In this case, please ask your your Komatsu distributo r to carry out replacement.