. OPERATION MACHINE OPERATIONS AND CONTROLS OPERATION MACHINE OPERATIONS AND CONTROLS 3 - 65 When the sp rocket (A) is at the front o f the m Push levers ( 3) forward slow ly to mov e the m achine 4. Switch the t ravel speed as follows. selector s witch (4) is pressed, th When th e travel speed travel sp eed can be swit ched between hi gh spee d and lo speed. e the switch is pressed, the travel speed is between low speed and high speed. Each tim e the switch is pressed, t he trav el speed switched between low s peed and high sp eed.
When the ma chine is travelin g at high speed, travel sp eed boo monitor (5) li For details of the travel spee d values, see Se "SPECIFICA TIONS (PAGE REMARK gine is started, the travel speed is automatically set to low speed. ng at high speed, if the machine travels on soft ground or up a slope and the load increases, the When the en gine is started, the trave l speed is automatically set to When traveli ng at high spe ed, if the machin e travels on soft groun d or up a slop ncrease travel is auto matically switc hed to low speed travel, s o there i s no need to operate the switch. Th e travel s peed boost monito r displays stay s lighted u p. system returns to high speed travel.
When the lo ad is reduced, t he travel system returns to high s peed t 5. Check that the travel alarm sounds. If t he alarm dose not soun ds, please contac t your K omatsu distributor for repair