Komatsu — RUBBER SHOES AND ROAD LINERS

. OPERATION MACHINE OPERATIONS AND CONTROLS the in the 3 - 86 Always maintain the rub ber shoes at the proper te nsion t o preven If the tension is low, the rubber shoes will come of f under the Even if the tension is co rrect, be extremely careful when carrying out 1. Avoid operating the ste ering when traveling over curbs, r ocks, or places where there t (more than approx. 20 cm (8 in) always jects, travel at right angles to 2. When traveling in rever se up a slope, do not turn when m oving from flat ground onto th e slope. on slopes, be sure to turn gradually. If it is necessary to turn on slopes, be sure to tur n gradually. 3.

Avoid traveling along the edge of slopes o on one side raised (with r on rough groundwith the track the machine tilting at anangle of mo re than approx. 10°) and with the track on the other side on flat ground. To avoid damage to the r ubber shoes and road liners, travel with the tracks on b oth sid es on flat ground. 4. If the machine is oper ated as explained in 1 to 3 abov rubber shoes is slacke ned. Do not steer the machine figure. positions shown in the