Komatsu — LOADING AND UNLOADING WITH TRAILER

. OPERATION TRANSPORTATION LOADING AND UNLOADING WITH TRAILER WARNING the machine, park the trailer on a flat firm surface or the trailer platform, then at the joint the ramps or on the platform of the 3 - 90 When loading or unloading, check off, and always travel at low spee If the monitor is on, the speed is se speed selector switch (2). Monitor (1) goes out and the spee Always keep the one-touch decele position during loading or unload When loading or unloading, run t speed, and operate slowly. When loading or unloading the m road surface. Keep ample distance between the Use ramps with ample width, lengt them at a maximum slope of 15°.

When using piled soil, compact th face from collapsing. Remove the mud from the underc slipping to the side on the ramps. Remove any water, snow, grease, ramps. Never change the direction of trav There is danger that the machine Return the machine to the road change the direction of travel. It is dangerous to use the work eq operation. Never operate any lever other tha The center of gravity of the mach between the ramps and the truck machine losing its balance.

Trave When swinging the upper structur is unstable, so pull in the work eq On machines with the cab specifi door is locked in position, both w If the door is open or closed on trailer, there isdanger that the oper not open or close the door on the When loading or unloading, alwa ys use ramps or a platform and carry ou t the operation as f