. OPERATION TRANSPORTATION wire rope through the bracket on the boom (see 3 - 97 When lifting the machine, carr y out the operation o n flat groun d as 1. 2. 3. 4. 1. Start th e engine, then sw ing the upper structu re so that work eq uipment is at sproc ket (1) end with the tr ack frame a upper s tructure set paralle 2. Raise t he blade fully. 3. Extend fully. When t operate the boom swing p edal to set the boom parallel to track fr ame, then set the p edal lock to the LOC K position. 5. Operat e the safety lock le ver to the LOCK posit REMARK For machin es equipped with a cab, there is only a sa fety lock le on t he left. 6.
Stop th e engine, check th at there is nothing aro und the op erator's compartment, then For cab specification mac hines, close the cab d oor and fro nt glass 7. Install s hackles to the liftin the bla de, then install the 8. Pass th diagram NOTICE use the three brackets. B e sure to use the three bracke D o not lift the machine with the boom or the upper stru cture swung B e carefu l not to get the hoses caught.