. MAINTENANCE MAINTENANCE PROCEDURE CLEAN WATER SEPARATOR ELEMENT WARNING DRAIN WATER AND SEDIMENT FROM FUEL TANK 4 - 27 Do not bring any fir Prepare a filter wrench Prepare a cont ainer to catch the fuel tha 1. Open the eng ine rear cover and cooling cover. For details, se Section "COO LING COVER (PAGE 3- 2. 3. Set handle (1 Loosen drain container unt ) of the water separator to plug (2) and drain the ac il red ring (3) reaches the CLOSED position (A cumulated water into bottom. Then tighte 4. plug (2). Use a filter wr then remove Be careful no t to lose red ring (3) inside 5. Wash the ins ide of cup (5) and elemen t (6) with diesel fuel 6. flushing oil. After washing 7.
Insert red ring (3) in element cup (5), fill the filter hold Tightening to the filter hold er and tighten ring (4). rque: 14.7 to 19.6 N·m (1. 14.5 lbft) Tightening to 8. Set handle (1 ) of the water separator to OPEN position (B). 9. After washing the water separator, blee For details of the procedure for bleedin g the air, see Section Air Bleeding (PAGE 4-51) NOTICE Never use trichle ne for washing the inside of the tank. Use diesel fue l only. Carry out this pro cedure before operating t he machine. t is drained. Prepare a cont ainer to catch the fuel tha 1. 2. 3. 4. 1. Swing the up per structure so that drain v alve (1) is between th tracks. 2.
Open the eng ine rear cover and cooling cover. For details, se Section "COO LING COVER (PAGE 3- 29)". sediment and wat e fuel. uel on yourself. n drain valve (3). 3. Open drain valve (1) and drain the collected at th e bottom together with th When doing t his, be careful not to get f 4. When only cl ean fuel comes out, tighte