Komatsu — CHANGE OIL IN ENGINE OIL PAN, REPLACE ENGINE OIL FILTER CARTRIDGE

. MAINTENANCE MAINTENANCE PROCEDURE CHANGE OIL IN ENGINE OIL PAN, REPLACE ENGINE OIL FILTER CARTRIDGE WARNING 4 - 49 Engine parts and oil are at high temperature im mediately after the engine is stopped, and will cause serious burns. Wait for the temperature to cool do wn before starting the o peration. Refill capacity: 7.4 Prepare a filter wr Change the oil and r hours. eplace the cartridge o nce eve ry 6 mo nths, In the same way, cha nge the oil and repla ce the c artridge once every 500 hours, even if the engine has not been operated for 6 month s. 1. Set a container t o catch the oil immediately under the drain ttom of the machine.

ug (P) slowly to avoid getting oil on yourself, ed oil, and if there are excessive metal gn material, please contact your Komatsu (P). plug (P) at the bo ttom of the machine. 2. Remove drain pl and drain the oil. 3. Check the drain particles or forei distributor. 4. Install drain plug xcessive contact omatsu 5. Open the engine rear cover. o catch the oil coming from the drain hose 6. Set a container t 7. leading from the Using a filter wre to remove it. tray under the filter cartridge. nch, turn filter cartridge (1) counterclockwise 8. Clean the filter ho lder, coat the new filter cartridge packing and threaded portion with clean oil (or coat thinly wit h greas e), then install.

REMARK Check that there is no old packing affixed to the filte r holder. If there s any old packing aff ixed to the filter, it wil l cause leakage of oil . 9. When installing; t ighten until the packi ng surfa ce conta cts the seal surface of the filter holder, then tighten it up 1/2 to 3/4 of a tur n. 10. After replacing th e filter cartridge, add oil throu gh oil fill er (F) until the oil level is betwe en the H and L marks on the dipstick (G). 11. Run the engine id le for a while, then st op the e ngine an d confirm that the oil level is b etween the H and L lines according to "Ch eck Oil Level in Engin e Oil Pa n, Add Oil (PAGE 3-43)".