. ATTACHMENTS AND OPTIONS BUCKET WITH HOOK BUCKET WITH HOOK PROHIBITED OPERATIONS 6 - 4 Operations with Care d the following loads when carrying out lifting operations. rd arm is installed: 215 kg (474 lb) m is installed: 160 kg (353 lb) s if the load sways excessively. Lower the engine erate the control levers slowly. eed of this machine is 3 to 4 times the speed of a . Be particularly careful to check that the rea is safe when operating the swing. ere is no damage to the hook, stopper, and hook ny abnormality is found, please contact your ributor. he machine while lifting a load. n the operating posture, there is danger that the may come off from the hook.
To avoid these parts off, pay careful attention to the angle of the hook. not allow any person to come under or in the area ed load. with hook is turned and used for operations, it will uring dumping operations, so be careful when d to swing or offset the boom when carrying out ns. facing the center. to be installed, please consult your Komatsu Do not excee d the following loads when car rying out lifting operations. When standa rd arm is installed: 215 kg (47 When long ar m is installed: 160 kg (353 lb) It is dangerou speed and op The swing sp mobile crane surrounding a s if the load sways excessively erate the control levers slowly eed of this machine is 3 to 4 ti .
Be particularly careful t rea is safe when operating the Check that th mount. If a Komatsu dist Never travel t Depending o wire or pulley may come off f rom the hook. T o avoid these parts from coming off, pay careful attention to the angle of the hook. In addition, do not allow any person to come under or in the area around a rais If the bucket with hook is turned and used f or operations, it will hit the arm d using it. It is prohibite lifting operatio Set the boom If a hook is distributor.