. ATTACHMENTS AND OPTIONS AIR CONDITIONER Every 250 Hours Maintenance CHECK AND ADJUST AIR CONDITIONER COMPRESSOR BELT TENSION Checking 6 - 8 The belt sho uld deflect 5 to 6 mm (0.197 to 0. 236 in) when p ressed with a finger force of a pprox. 5 8.8 N (6 kg midway between the idle pulley and compressor pull Adjustment elt tension with adjustment nut (2) of idle pulley (1). engine rear cover and loosen locknut (3). Adju st the b elt tension w ith adjustment nut ( 2) of idle pulle y (1). 1. 2. i 3. 4. c 5. 6. 1. Open the engine re ar cover and loosen locknut (3). 2. Adjust w ith adjustm ent nut ( 2) so that the deflection of t he belt s 10 to 1 5 mm (0.4 to 0.6 in ) (approx. 58 .8 N (approx.
6 kgf)). 3. Tighten nut (3) to ho ld idle p ulley in posi tion. 4. Check fo r damage to the pulleys, and we ar of the V-groove and V-belt. B e particular ly carefu l to check th at the V-belt i s not in ontact with the bott om of th e V-groove. 5. Replace belt if it h as stretched, leavi adjustme nt, or if the re is a c ut or crack o 6. When th hour.