. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT MACHINE READY FOR ATTACHMENT LOCATIONS (1) (2) Quick coupler Selector valve (3) (4) Attachment control pedal Pedal lock (for attachment control pedal) Quick Coupler This quick coupler (1) is used to connect the piping equipped with quick coupler at the attachment end. The following products are used for the quick coupler. Arm left side (hole end): STUCCHI (F FIRG12A BSP) Arm right side (shaft end): STUCCHI (APM15 3/4 BSP) When removing the attachment, install this coupler (1) to cap (A). When installing the attachment, remove cap (A), clean all the dirt from coupler (1), then connect the piping.
The following products are used for quick coupler cap (A). Arm left side (hole end): STUCCHI (8151..004) Arm right side (shaft end): STUCCHI (8151..009) 6 - 12 There are two typ es for the hydraulic p ressur e takeoff: quick coupler and stop