. SAFETY SAFETY INFORMATION removing the cap or plug. 2 - 13 BURN PREVENTION Hot coolant To prevent burns from hot wa ter or steam spurting out when Hot To checking or draining the coola nt, wait for the water to cool to a temperature where it is possi ble to touch the radiator cap by hand before starting the operat ion. Even when the coolant has cooled down, loosen the cap inside the radiator before remo Hot oil To draining the oil, wait for the oil to cool to at temperature where it is possible to touch the cap or plug by hand before starting the operation.
Even when the oil cap or plug slowly to reliev has cooled down, loosen the e the internal pressure before FIRE PREVENTION AND EXPLOSI ON PREVENTION w washer liquid are particularly dous. To prevent fire, always me near fuel or oil. eling. hile adding fuel or oil. securely. ted surfaces or on parts of the r adding or storing oil and fuel. Fire Do not smoke or use any fla Stop the engine before refu Do not leave the machine w Tighten all fuel and oil caps Do not spill fuel on overhea electrical system. Use well-ventilated areas fo Keep oil and fuel in the det ermined place and do not allow er. up any spilled fuel or oil.
unauthorized persons to ent After adding fuel or oil, wipe When carrying out grinding or welding work on the chassis, move any flammable mat starting. erials to a safe place before When washing parts with oil , use a non-flammable oil. Diesel oil and gasoline may catch f ire, so do not use them. flammable materials into a safe at the work place. torch to cut any pipes or tubes ds. Put greasy rags and other container to maintain safety Do not weld or use a cutting that contain flammable liqui