. SAFETY SAFETY INFORMATION 2 - 16 ATTACHMENT INSTALLATION When installing optional parts or attachments, there may b e problems with safety or legal restrictions. Therefore contact your Komatsu distributor for advice. Any injuries, accidents, or product failures resulting from th e use of unauthorized attachments or parts will not be the responsibility of Komatsu. When installing and using optional attachments, read the i nstruction manual for the attachment, and the general information related to attachments in this manual.
ATTACHMENT COMBINATIONS Depending on the type or combination of work equipment, the re is a hazard that the work equipment may hit the cab or other parts of the machine. Before using unfamiliar work eq uipment, check if there is any hazard of interference, and operate with caution. CAB WINDOW GLASSES If t he cab glass on the work equipment side is broken, there is a hazard that the work equipment may contact the operator's body directly. Stop operation immediately and rep lace the glass. UNAUTHORIZED MODIFICATIONS Any modification made without authorization from Komatsu consult your Komatsu distributor. can create hazards.
Before making a modification, Komatsu will not be responsible for any injuries, accidents , product failures or other property damages resulting from modifications made without authorization from Koma tsu. SAFETY AT JOBSITE unusual conditions that could be dangerous. Before starting operations, thoroughly check the area for any When carrying out operations near combustible materials such as thatched roofs, dry leaves or dry grass, there is a hazard of fire, so be careful when operating. Check the terrain and condition of the ground at the worksi te, and determine the safest method of operation. Do not carry out operations at places where there is a hazard of landslides or falling rocks.
y be their ines. rson trian or by und, epth If water lines, gas lines, or high-voltage electrical lines ma buried under the worksite, contact each utility and identify locations. Be careful not to sever or damage any of these l Take necessary measures to prevent any unauthorized pe from entering the operating area. In particular, if you need to operate on a road, protect pedes and cars by designating a person for worksite traffic duty installing fences around the worksite. When traveling or operating in shallow water or on soft gro check the shape and condition of the bedrock, and the d and speed of flow of the water before starting operations.
WORKING ON LOOSE GROUND Avoid traveling or operating your machine too close to th e edge of cliffs, overhangs, and deep ditches. The ground may be weak in such areas. If the ground should c ollapse under the weight or vibration of the machine, there is a hazard that the machine may fall or tip over. Rem ember that the soil after heavy rain or blasting or after earthquakes is weak in these areas. When working on embankments or near excavated ditches , there is a hazard that the weight and vibration of the machine will cause the soil to collapse. Before starting op erations, take steps to ensure that the ground is safe and to prevent the machine from rolling over or falling.