. SAFETY SAFETY MACHINE OPERATION REMARK 2 - 26 OPERATIONS ON SNOW Snow-covered or frozen surfaces ar e slippery, so be extremely careful when traveling o r operating the machine, and do not ope rate the levers sudde may careful when With frozen gro machine to tip If the machine e nters deep snow, the re is a hazard t hat it may tip over or become burie d in the snow. Be carefu not to leave the road shoulder or to get trapped in a snow drift . When clearing snow, the road should er and objects placed beside the road are buried in the snow and cannot be seen. There is carefully.
a hazard of the machine tipping over or hitting covered objects, so always carry out operations PARKING MACHIN E ne on firm, level ground. where there is no hazard of falling rocks o f flooding if the land is low. Park the machi ne on firm, level grou Select a place where there is no landslides, or o f flooding if the land i Lower the work equipment and blad e completely to t he ground When leaving th e machine, set safet y lock lever (1) t o the LOC position (L), the n stop the engine.
Fo r machines equ ipped with a cab, ther e is only a safet y lock leve on Always close th e operator's cab door , and use the ke y to lock a the equipment i n order to prevent any unauthorized p erson from moving the ma chine. Always remov e the key, take it with you and leave it in t he specified place. If it is necessar y to park the machin e on a slope, al ways do a follows. Set the buc ground. Put blocks moving. ket on the downhill side, then dig it into th under the tracks to prevent the machine from