. OPERATION DETAILED CONTROLS AND GAUGES Keep the Horn Switch of the knob of the right work 3 - 13 Starting Switch This s witch (1) is used to start or OFF p The k ey can be inserted o r withdrawn. The switches syste m are all turned off a nd the engine is stopped ON po sition t flows in the charging and lamp circ Electri c curren startin g switch key at the ON position while the eng STAR T positio n This is the engi ne-start po sition. Keep the key at this position during cranking. Immediatel y after starting the engine releas e the ke y. It will aut omatically return to the O N position. HEAT (prehea When starting t he engine i n cold weather, turn the k ey to this position.
When the key is se t to the HEAT pos ition, the preheating mo nitor lights up. Keep the key at this position until the preheating monitor When the preh eating mon itor goes out, release the When the key is released , it will return to the OFF position, so turn it immediately to ST ART and start the engine. Press center equipment lev er to sound Lamp Switch Use th is switch (3) to turn on the headlamps and th e lamp inside the machine For de tails, se e MONITO R SWITCHES, Section "L amp Switch (PAGE 3-10)". Travel Speed Selector Swi tch ch the travel speed to low speed or high speed.
Use th is switch (4) to swit ch the travel speed to low speed or high speed For de tails, se e MONITO R SWITCHES, Section "T ravel Speed Selector Switch (PAGE