. OPERATION DETAILED CONTROLS AND GAUGES Safety Lock Lever WARNING safety lock lever to LOCK Machine equipped with canopy (F): Free (L): Lock When the left lever is pulled up, the lever stand springs up and is locked. When the right lever is pulled up, the lever stand does not move, but it is locked. Machine equipped with cab (F): Free (L): Lock When the left lever is pulled up, the lever stand springs up and is locked. 3 - 17 When lea ving the operator's compartment, set the safety lock lever securely to the LOCK positi on (L). If the safety loc k lever is not at t he LOCK position (L) and the control levers are touched by mistake, it may lead to ser ious personal injury.
If the safe ty lock leveris not set securely to LOC K position (L), it may cause serious personal injur y. Alwayscheck that th e lever is at LOC K position (L). t to touch the work equipment control lever. ul not to touch the work equipment control lever. When pul ling the safety lever up, be careful no When pus hing the safety lever down, be caref ul not to touch the work equipment control lever.
This lever ( 1) is a device to lock the operati on of the work equipment, swing, travel, and When the l ever is pulled up, it is set to LOC This safety lock lever is a hydraulic lock type , so even when it is at LOCK position (L), the control levers and p edals move, but t he work equipment and and the machine do not move. REMARK If the sa fety lock lever on either the left o r right is not at LOCK position (L), the engin Check t hat the safety lock lever is at LO CK position (L) before operating the starting If the en gine stops when the safety lock lever is at FREE position (F), operate the switch.
position (L) before operating the starting REMARK The engine can be started even when the rig position (F) . REMARK For machin es equipped with a cab, there is o on the left.