. OPERATION OPERATION OPERATION CHECK BEFORE STARTING ENGINE, ADJUST WARNING loose bolts, or leakage of oil from 6. Check for damage to handrail and loose bolts Repair any damage and tighten any loose bolts. 3 - 59 WALK-AROUND CHECK Before starting the engine, walk aro und the machine and look at the underside of chassis for a nything unusual l ike loose bolts and nuts, leakage of fu hydraulic system. el, oil and coolant. Also check the condition of the work equipment and the d collection of dust at places that reach high temperature.
the Also check for loose wiring, play, an d collection of dust at places that reach high temperature Leakage of oil or fuel, or accumulatio n of flammable material around high temperature parts, such a s the engine m uffle r or turbocharger, may cause fire. Check carefully, and if any abnormali ty is found, repair it or contact your Komatsu distributor. ty is found, repair it or contact your Komatsu dist Do not get on or off the machine from the rear. Using this position is dangerous becau se it is easy to slip and you c annot be seen from the operator's compartmen t. Always use the handrail and step at the side wh en getting on or off the machine.
If the machine is at an angle, make it level before checking. und the machine and under the machine to check for loose nut or bolts, or Before starting the engine, look aro bolts, leakage of oil, fuel, or coolant, and c heck the condition of the work equipment and hydraulic sy stem. Check also for loose wiring, play, and collection of dust at places which reach high temperature s. Always carry out the items in this se ction before starting the engine each day. 1. Check for damage, wear, play i n work equipment, cylinders, linkage, hoses Check for cracks, excessive we found, repair it. ar, play in wotk equipment, cylinders, linkage , and hoses. If any abnormalit y is 2.
Remove dirt and debris from ar ound the engine, battery, and radiator Check for dirt accumulated arou grass, etc.) accumulated aroun parts. If any dirt or flammable m nd the engine or radiator. Also check for flam mable materi al (dry leave s, twigs, d the battery, engine muffler, turbocharger, or other high temperature engine aterials are found, remove them. temperature 3. Check for coolant and oil leakag e around the engine Check for oil leakage from the e repair it. ngine and coolant leaks from the cooling system. If any abnormality is found, stem. If any a bnormality i s found, 4.
Check for leakage of oil from po wer train case, final drive case, hydraulic tan k, hose, joint s Check that there is no oil leakag Check for leakage of oil from th e. If any abnormality is found, repair the pla ce where the oil is leaking e undercover. Check the ground for traces o f oil leakage. 5. Check the undercarriage (track rollers If any damage, wear, or oil leak age is found, repair the problem and tighten