Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION CHECK OIL LEVEL IN HYDRAULIC TANK, ADD OIL WARNING 1. Put blade on the ground and stop the engine. Wait for 5 ground, too. NOTICE so may lead to machine is at an angle, move it to a level 3 - 68 When remo ving the oil filler cap, oil ma y spurt out, so stop t he engine and wait fo r the oil temperature to go d own, then turn t he cap slowly to release the internal pressure before re moving the cap. If oil has be en added to above the H ma rk, stop the engine an d wait for the hydraul ic oil to cool down. Then rem ove drain plug (P), lo osen drain valve (1), a nd drain the before checking oil level. Oil level should be between d L in sight gauge (G).

If damage to the oil pressure circuit and spo uting out of oil 2. If the lev el is below the L mark, a dd oil through oil fill er (F). REMARK When inspe cting, if the place to carr