. OPERATION OPERATION seat can be adjusted to 3 positions. After 3. Tighten knob (2) securely. It is possible to effortlessly adjust the standard height up 50 mm (2 in) or down 50 mm (2 in). The steering, directional, and gearshift lever moves as a unit. Turn up/down left adjustment knob (1) to adjust the height. Turn the knob to adjust as follows. Turn CLOCKWISE to move UP Turn COUNTERCLOCKWISE to move DOWN the height. height, close the armrest. 3 - 74 ADJUST ARMREST The height of the armre adjusting the operator's seat, adjust the armrest to a sui table height.
ADJUST ARMREST (RIGHT ) Armrest (1) on the right side of the operator's cab part c an be adjusted up 30 mm (1.2 in) or down 30 mm (1.2 in based on the standard 1. Loosen knob (2) (2 2. Move the armrest on the operator's seat to the front, then align the position of the 3 holes {high (H), middle (M), low (L)}. ADJUST ARMREST (LEFT) The armrest on the left side of the operator's compartm ent can be 1. When adjusting heig ht of both armrest and case 2. When adjusting heig ht of armrest only It is possible to effor from the armrest an The steering, directi tlessly adjust up to 36 mm (1.4 i n) upward d case contact surface. onal, and gearshift lever does not move.
onal, and gearshift lever does n ot move. nd turn knob (2) counterclockwis e to adjust l move up. After adjusting it to th e desired mrest.