. OPERATION OPERATION PRECAUTIONS FOR OPERATION (A): Permissible water depth line let the track rollers and final drive cool off before starting up the machine again. PRECAUTIONS WHEN TRAVELING UP OR DOWN HILLS 3 - 93 PAY ATTENTION TO G AUGES If the red range of the pow er train oil temperature gauge lig hts up d uring operation , reduce th e load a nd wait f or the temperature to go down. METHOD OF USING ST EERING CLUTCH If the steering clutch one si de is used frequently or if many g radual t urns a re made w ith steerin g clutch half-engaged, the steering clutch will we ar out in a short time. Design th e travel road well and st eer the m achine p roperly.
PERMISSIBLE WATER DEPTH always keep top surface of the track f the water. When operating in water, frame above the surface o Also, be careful that the en gine cooling fan will not come in contact with water. The fan can be damaged. PRECAUTIONS WHEN TRAVELING FOR A LONG TIME Avoid operating the mac hine at high speed for a lon g time, otherwise the temperature of hydraulic oil sharply rises, and that can cause oil leakage from durability.
If there is no way to avoid the track rollers or final drive and lower operating the machine at high speed for a long time, stop the mac hine every one hour for 30 minu tes and METHOD OF USING DECE LERATOR PEDAL When stepping on the dec elerator pedal while going uphill, climbin g abilit y will be re duced an d the ma chine wil l stop. Furthermore, the engine m ay stall. USE ENGINE AS BRAKE When going downhill, mov e steering, forward-reverse, ge ar shift l ever i nto low sp eed to run engine at slow speed and travel down slope usi ng the engine as a brake. forward-reverse, gear shift lever to the NEUTRAL position. of more than 15°, shift down to 1st speed (R1 or F1).
Do not move the steering, forward-reverse, gear shift leve r to the NEUTRAL posi When traveling down hills of more than 15°, shift down to 1st speed (R 1 or F1). BRAKING WHEN TRAVELI While descending a slope using the engine as a brake, al so apply the b Failure to brake may resul t in overrunning, causing engin e trouble