Komatsu — EFFECTIVE USE OF MODE SELECTION SYSTEM

. OPERATION OPERATION When using shoe slip control, the travel speed for bedrock setting modes [1] - [5] is set at approx. 70 - 90% of the full travel speed. When traveling on bedrock, if it is felt that the travel speed when 3 - 103 REVERSE SLO W MODE he travel speed when traveling in reverse, reduces This reduces t n traveling in r everse, r educes the frequency o f operating the decel erator pedal, a nd impro ves the riding comfort f or the operator. R1, 2, 3 on bedrock, traveling down Speed rang Applicable o es that can be used: perations: Traveling steep hills Use this mode to reduce the travel speed when traveling in R1, R2, or R3.

When the reve rse slow mode is ON, the travel speed is set to f the full travel speed. approx. 80% o f the full travel speed Use this mode to reduce the travel s peed when tra veling in r everse after ripping an d dozing bedrock or when traveling in revers e after dozing on stee p slopes. The trave l speed differ s in each mode according to w hether it is used in c hoe slip control. ombination with the economy onomy mode or with s traveling in rev erse is too high, turn the reverse sl ow mode ON.

This will reduc e the travel speed w hen traveling i n reverse When traveling down slopes, if it is felt that the tra vel spee d when traveling in rev erse is too high, turn the reverse sl ow mode ON. This will reduc e the travel speed w hen traveling i n reverse