Komatsu — EVERY 1000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE 4 - 65 5. Remove the cover on left fe nder, remove bolts ( 3) and case ( 4). 6. Take ou t strainer ( 5) and m agne If any d amage to ew one. magnet with a n 7. Loosen bolt (7), th en divide into strainer (5) an d magnet (6 Tightening torque of bolt (7): 46 to 59 Nm (4.7 to 5.9 kgm, 34 to 43 lbft) 8. Remove all dirt from strainer, then wash in clean diesel oil or flushing oil. Clean the case interior and the removed parts. 9. Install the strainers to their original position. Tightening torque of bolt (7): 46 to 59 N m (4.7 34 3 lbft) 8. Remove flushing Clean th e case int erior and the r emoved parts 9.

Install th e strainers to their origin al position. 10. After ins talling, rep lace the transmission and t orque c onverter filter ele ments. Fo r details , see " REPLACE T RANSMISSION FILTER ELEMEN T AND TO RQUE CONVERTER OIL )". OIL FILTER ELEMENT (PAGE 4-61 11. Refill the specified quantity of oil through oil fil ler (F). 12. Check t hat the oil i s at the specif ied leve For det ails, see " CHECK OIL LEVEL OWER TRAIN CASE ( INCL. TR ANSMISSIO N, TORQUE CONVERTER AND BE VEL GEA R CASES), A DD OIL ( PAG E 3-65)".