. OPERATION EXPLANATION OF COMPONENTS METER GROUP D(1) D(2) D(3) D(4) D(5) Engine coolant temperature gauge Power train oil temperature gauge Fuel gauge Engine pre-heating pilot lamp Dual/single tilt selector display lamp (Dual tilt dozer specification) D(6) D(7) D(8) D(9) Display panel A (Speed range display) Display panel B (Service meter) Auto shift mode display lamp Torque converter lock up pilot lamp ENGINE COOLANT TEMPERATURE GAUGE This gauge (1) indicates the temperature of the cooling water. If the temperature is normal during operation, the green range will light. If the red range lights up during operation, move the Fuel control dial to lower the engine speed to approx.
3/4 of the full speed, and run until the water temperature enters the green range. If the engine cooling water temperature enters the red range, and the engine water temperature monitor flashes and the alarm buzzer sounds, stop the machine and run at low idling until the water temperature enters the green range. NOTICE If the water temperature gauge often enters the red range, check the radiator for clogging. 3 - 13 NOTICE While the engin e is at rest, turn th e starting sw itch to the ON pos ition to see if the engi ne coolant temperatur e gauge, pow er train oil temperature gauge, fuel level g auge , and m onitor lamps all li ght up. it.
If they do not, h ave your Komatsu distributor inspect and repair