. OPERATION EXPLANATION OF COMPONENTS to REMARK PCCS: Palm command control system right to turn the machine. The is 3 - 28 JOYSTICK (STEERING, DIRECTIONAL AND GEAR SHIFT LEVER) (PCCS lever) This lever (2) is used to swi tch between forward and reverse, ut counterrotation turns. steer the machine, or carry o orward; move to the rear to drive in front or rear, operate the lever partially to the left or r the same direction as the lever is operated. he left or right, the machine will turn in a small radius. rtially to machine will turn gradually in the same direction as the lever is operated.
If t he lever is moved fully to t he left or right, the machine will tur n in a small r REMARK If the lever is released wh en steering the machine, the lever will return to the (a) position or th e (b) positio n and the machine will be return ed to straight movement. onal, and gearshift lever is at th FORWARD or REVERSE p osition and switch (c) or switch (d) eed will change. switch is pressed, the transmissi e speed. e the switch is pressed, th ion will shift down one speed. speed in each speed range, se 5-2)". pushed, the transmission sp UP switch (c): Each time the will shift up on DOWN switch (d):
Each tim transmiss For details of the maximum Fo "SPECIFICATIONS (PAGE REMARK sed is displayed on the monitor panel according to the gearshift operation. the display panel. played on the display panel. layed on the display panel. ever is locked,P is displayed d of shifting gear according to the shift mode,see the"SHIFTING GEAR (PAGE The speed range being u sed is displayed on the monitor pan el according to the gearshift op Neutral:N is displayed on FORWARD 2nd:F2 is dis REVERSE 3rd:R3 is disp When the parking brake l For details of the metho the"SHIFTIN PAGE 3-86)".Shift mode selectio n means the selected speed range is displayed at the N position b efore startin g.