Komatsu — POWER SOURCE

. OPERATION EXPLANATION OF COMPONENTS When the condition is normal, The hourglass mark and service meter are displayed panel B (service meter portion). When the condition is normal, The hourglass mark and service meter are displayed panel B (service meter portion). equipment. source for 12V 3 - 37 TRANSMISSION C ONTROLLER the operator's seat) (In the rear side of This controller carr ies out electronic control of the work equipment and lock-up torque converter. If any abnorm ality occurs, th e failure mode is displayed on the service meter disp lay. on display ENGINE CONTROL (Left side of engin This controller (3) c arries out electronic contr ol of the engin e speed and output.

If th ere is any abnormality, ode is displayed in the se on display DUST INDICAT OR leaner bracket inside the engine room. es that the air cleaner element is clogged. This is on the air c leaner bracket inside the engine r This device indicat es that the air cleaner ele ment is clogged. For details on how to clean the element, s ee "CHECK, CLEAN AND REPLACE A IR CLEANER ELEMENT (PAGE 4-24)" . POWER SOUR The cigarette lighte r socket (1) can be used as a power source for 24V equipment an d the accessory socket (2 ) can be used for 12V NOTICE The cigarette lighter equipment. is 24V. Do not use it as the power igarette lighter is 120W (24V x 5A). ccessory socket is 60W (12V x 5A).

The capacity of the c igarette lighter is 120W (24V The capacity of the a ccessory socket is 60W (12V