John Deere 450DLC, 650DLC, and 850DLC Excavators — Alternative and Synthetic Lubricants

Maintenance—Machine Alternative and Synthetic Lubricants Conditions in certain geographical areas may require lubricant recommendations different from those printed in this manual. Some John Deere brand coolants and lubricants may not be available in your location. Texaco Rando 46 Mobil DTE25-46 Shell Tellus T46 Synthetic lubricants may be used if they meet the performance requirements as shown in this manual. IMPORTANT: Avoid mixing different brands or types of oils. Oil manufacturers blend base stock and additives to create their oils and to meet certain specifications and performance requirements.

Mixing different oils can interfere with proper functioning of these formulations and degrade lubricant performance. The temperature limits and service intervals shown in this manual apply to both conventional and synthetic oils. Re-refined base stock products may be used if the finished lubricant meets the performance requirements. If alternative hydraulic oils are required, the hydraulic system needs to be completely flushed. This may require large amounts of oil to properly drain previous product. This machine is factory filled with Super EX 46HN extended life zinc-free hydraulic oil. Avoid servicing this machine with products that do not meet this specification.

If oils have been mixed or if alternate service oils are desired, the complete hydraulic system needs to be totally flushed by an authorized dealer. NOTE: The following alternative oils could be used if factory fill has been completely flushed out. If using the following alternative oils, a reduced service interval of 1500 hours must be maintained. Consult your authorized dealer to obtain specific information and recommendations. DW90712,000057F –19–28APR08–1/1 3-1-5 010609 PN=104