John Deere 450DLC, 650DLC, and 850DLC Excavators — Clean Radiator Inlet Screen

Maintenance—As Required Clean Radiator Inlet Screen 1. Turn machine off. 2. Remove cap screws from cooling package door to open (1). TX1002531A –UN–10JAN06 CAUTION: Prevent possible injury from flying chips if compressed air is more than 210 kPa (2.1 bar) (30 psi). Reduce compressed air to less than 210 kPa (2.1 bar) (30 psi) when using for cleaning purposes. Clear area of bystanders, guard against flying chips, and wear personal protection equipment including eye protection. 450DLC Shown 3. Attach an air wand to an air compressor, and blow out dirt and debris from the door screen (2). TX1002535A –UN–10JAN06 4. Remove cap screws (3) (2 used) on fuel cooler/A/C condenser panel. 5.

Use air compressor, and blow out dirt and debris from inside of panel (4) and door screen (2). 6. Close panel, and install cap screws on fuel cooler/A/C condenser panel. 450DLC Shown 1—Cooling Package Door Cap Screws (4 Used) 2—Cooling Packing Door Screen 3—Cap Screws (2 Used) 4—Fuel Cooler/A/C Condenser Panel 7. Close cooling package door, and install necessary cap screws. Continued on next page DW90712,0000026 –19–31OCT06–1/2 3-3-5 010609 PN=132