John Deere 450DLC, 650DLC, and 850DLC Excavators — Check Engine Oil Level

Maintenance—Every 10 Hours or Daily Check Engine Oil Level IMPORTANT: Prevent engine damage. Do not run engine when oil level is below the ADD mark. The most accurate oil level reading is obtained when the engine is cold before starting the engine for the day’s operation. TX1001729A –UN–21DEC05 There are two ways to check the engine oil level: Using the dipstick: 1—Dipstick 2—Filler Cap 1. Make sure dipstick (1) is fully seated. 2. Remove dipstick to check oil level. BEFORE THE ENGINE IS STARTED: The engine is full when oil level is between the circle marks. AFTER THE ENGINE HAS BEEN RUN: Allow the oil to drain into the oil pan for 10 minutes before checking the oil level.

Ten minutes after shutdown the engine oil level must be between the circle marks. 3. If necessary, remove filler cap (2) to add oil. (See Engine Oil in Section 3-1.) Continued on next page DW90712,000000E –19–20JAN06–1/2 3-4-2 010609 PN=139