John Deere 450DLC, 650DLC, and 850DLC Excavators — Clean Primary Air Cleaner Element - 450DLC and 650DLC

Maintenance—Every 250 Hours Clean Primary Air Cleaner Element - 450DLC and 650DLC 1. Unscrew wing nut (1), and remove outer cover. 2. Unscrew wing nut (2) to remove primary element TX1001778A –UN–21DEC05 3. Pull primary element (3) straight back to remove. 4. Tap element with the palm of your hand, NOT ON A HARD SURFACE. CAUTION: Prevent possible injury from flying chips if compressed air is more than 210 kPa (2.1 bar) (30 psi). Reduce compressed air to less than 210 kPa (2.1 bar) (30 psi) when using for cleaning purposes. Clear area of bystanders, guard against flying chips, and wear personal protection equipment including eye protection. TX1001781A –UN–03JAN06 5.

If this does not remove dust, use compressed air under 210 kPa (2.1 bar) (30 psi). 6. Direct air up and down the pleats from inside to outside. Be careful not to make a break in the element. 1—Outer Cover Wing Nut 2—Primary Element Wing Nut 3—Primary Element Continued on next page DW90712,0000014 –19–31OCT06–1/2 3-6-7 010609 PN=151