Maintenance—Every 500 Hours 2. Turn filter canister (1) counterclockwise to remove. 3. Clean filter gasket contact area. 4. Apply a thin film of clean oil to the gasket of new filter. 5. Install new filter. Turn filter canister clockwise by hand until gasket touches contact area. TX1002165A –UN–04JAN06 6. Tighten filter canister 1/2 turn more using wrench. 7. Bleed air from hydraulic system. (See next story.) 8. Check for any leakage. 650DLC Shown 1—Filter Canister 9. Check oil level. DW90712,000001E –19–25MAY06–2/2 3-7-5 010609 PN=160