John Deere 450DLC, 650DLC, and 850DLC Excavators — Change Pump Drive Gearbox Oil — 650DLC and 850DLC only

Maintenance—Every 1000 Hours Change Pump Drive Gearbox Oil 650DLC and 850DLC only 1. Remove drain plug (3). Open ball valve (4). Allow oil to drain into a container. Dispose of waste oil properly. TX1001870A –UN–28DEC05 2. Close ball valve, and install drain plug. 3. Remove fill cap (2). 4. Specification Pump Drive Gearbox—Oil Capacity 6.2 L .............................................................................................. 1.6 gal 650DLC Shown Add oil per specifications. (See Section 3-1.) TX1002388A –UN–06JAN06 5. Remove dipstick (1), and check oil level. Oil level must be approximately halfway below "H" mark. Install dipstick. 6. Install fill cap.

1—Dipstick 2—Fill Cap 3—Drain Plug 4—Ball Valve T145092 –UN–31AUG01 DW90712,0000022 –19–23JAN06–1/1 3-8-4 010609 PN=169