Miscellaneous—Machine JDLink Machine Monitoring System (MMS) Direct Laptop Connection—If Equipped NOTE: (Location of control box behind the access door may vary depending on model.) TX1025143A –UN–19JUN07 Open left door (1) to access JDLink MMS. To download machine data using the JDLink MMS Direct: Install the JDLink MMS Direct cable by inserting the Ethernet connector into the laptop. Connect the JDLink MMS Direct cable to the vehicle 4-pin Deutsch connector (2). Launch JDLink MMS Direct Software. Contact your authorized dealer to obtain the JDLink MMS Direct Kit (AT347680), which includes the JDLink MMS Direct cable (AT335476) and software. 350DLC shown TX1025668A –UN–07MAR08 NOTE:
On equipment using the JDLink Direct system, there is no nightly upload to a remote server and thus, the information is only stored in one location—the controller. Without downloading the controller data on a regular basis, the data could be lost if the controller were to fail. To obtain the most detailed machine data on your laptop, you must perform a machine data download every 1000 hrs or less. 1—Left Access Door 2—4-pin Deutsch Connector JDLink is a trademark of Deere & Company OUT4001,00002F1 –19–26JUN07–1/1 4-1-9 010609 PN=191