John Deere 450DLC, 650DLC, and 850DLC Excavators — Installing Counterweight (Without Hydraulic Removal Option)

Miscellaneous—Machine Assembly Installing Counterweight (Without Hydraulic Removal Option) IMPORTANT: DO NOT attempt to remove or install counterweight with the track gauge in the narrow transport position. Before removing or installing the counterweight, the track gauge must be widened to the work position. To change track gauge, see story in this section. T123731 –UN–27AUG99 NOTE: Counterweight installation procedure must be performed with the machine located on a level surface. CAUTION: Never allow anyone to enter the area under the lifted counterweight. 1. Lift counterweight (A) using a crane.

T123732 –UN–27AUG99 Specification Counterweight—450DLC—Weight 9,150 kg Approximate .......................... 20,172 lb Approximate Specification Counterweight—650DLC—Weight 11,100 kg Approximate ........................ 24,471 lb Approximate A—Counterweight B—Base Machine C—Cap Screw D—Washer E—Stopper F—Washer G—Nut H—Spacer I—Lock Plate J—Washer K—Cap Screw Specification Counterweight—850DLC—Weight 13,300 kg Approximate ........................ 29,321 lb Approximate 2. Insert the convex bosses of counterweight into holes on base machine (B). Install washers (D) (outer diameter: 80 mm) and counterweight mounting cap screws (C). Tighten cap screws. Do not overtighten.

Specification Counterweight Mounting Cap Screws—450DLC—Torque 2400 ........................................................ 1735 lb-ft Specification Counterweight Mounting Cap Screws—650DLC—Torque 2800 ........................................................ 2065 lb-ft Continued on next page DW90712,000008F –19–15FEB06–1/2 4-5-20 010609 PN=263