Miscellaneous—Storage Prepare Machine for Storage 1. Repair worn or damaged parts. Install new parts, if necessary, to avoid needless delays later. T47764 –UN–09NOV88 2. Clean primary air cleaner. IMPORTANT: High pressure washing greater than 1379 kPa (13.8 bar) (200 psi) can damage freshly painted finishes. Paint should be allowed to air dry for 30 days minimum after receipt of machine before cleaning parts or machines with high pressure. Use low pressure wash operations until 30 days have elapsed. 3. Wash the machine. Use low pressure wash operations (less than 1379 kPa (13.8 bar) (200 psi) until 30 days after receipt of machine have elapsed. Paint areas to prevent rust.
Replace decals, where needed. T5813AM –UN–09FEB89 4. Park machine on a hard surface to prevent tracks from freezing to ground. 5. Store machine in a dry, protected place. If stored outside, cover with a waterproof material. IMPORTANT: LPS 3 Rust Inhibitor can destroy painted finish. DO NOT spray LPS 3 Rust Inhibitor on painted areas. 6. Retract all hydraulic cylinders, if possible. If not, coat exposed cylinder rods with LPS 3 Rust Inhibitor. 7. Place a "DO NOT OPERATE" tag on the right control lever. 8. Lubricate all grease points. 9. Remove batteries. 10. Remove seat cushion and other perishable items. 11. Remove keys and lock all covers and doors.
LPS is a trademark of the Holt Lloyd Corporation. TX,105,FF2313 –19–29JUN06–1/1 4-8-1 010609 PN=306