John Deere 450DLC, 650DLC, and 850DLC Excavators — 450DLC Working Ranges

Miscellaneous—Specifications NOTE: Specifications and design subject to change without notice. Wherever applicable, specifications are in accordance with PCSA and SAE standards. Except where otherwise noted these specifications are based on a machine equipped with 900 mm (36 in.) shoes, counterweight and 3.9 m (12 ft 10 in.) arm. Item Measurement Specification 1—Maximum Digging Reach Distance With 3900 mm Arm: 12 490 mm With 12 ft 10 in. Arm: 41 ft 0 in. 2—Maximum Digging Reach At Distance With 3900 mm Arm: 12 280 mm Ground Level With 12 ft 10 in. Arm: 40 ft 3 in. 3—Minimum Swing Radius Radius With 3900 mm Arm: 4810 mm With 12 ft 10 in. Arm: 15 ft 9 in.

4—Maximum Cutting Height Height With 3900 mm Arm: 11 160 mm With 12 ft 10 in. Arm: 36 ft 7 in. 5—Maximum Dumping Height Height With 3900 mm Arm: 7770 mm With 12 ft 10 in. Arm: 25 ft 6 in. 6—Maximum Digging Depth Depth With 3900 mm Arm: 8270 mm With 12 ft 10 in. Arm: 27 ft 2 in. 7—Maximum Digging Depth (flat Depth With 3900 mm Arm: 8140 mm bottom) With 12 ft 10 in. Arm: 26 ft 8 in. 8—Maximum Vertical Wall Depth With 3900 mm Arm: 6980 mm With 12 ft 10 in. Arm: 22 ft 11 in. 9—Tail Swing Radius Radius With 3900 mm Arm: 3645 mm With 12 ft 10 in. Arm: 12 ft 0 in. VD76477,00003E9 –19–22MAY06–2/2 4-10-4 010609 PN=313