John Deere 450DLC, 650DLC, and 850DLC Excavators — 850DLC Working Ranges

Miscellaneous—Specifications NOTE: Specifications and design subject to change without notice. Wherever applicable, specifications are in accordance with PCSA and SAE standards. Except where otherwise noted, these specifications are based on a machine equipped with 900 mm (36 in.) shoes, counterweight and 4.4 m (14 ft 5 in.) arm. Item Measurement Specification 1—Maximum Digging Reach Distance With 4400 mm Arm: 14 910 mm With 14 ft 5 in. Arm: 48 ft 11 in. 2—Maximum Digging Reach At Distance With 4400 mm Arm: 14 640 mm Ground Level With 14 ft 5 in. Arm: 48 ft 0 in. 3—Minimum Swing Radius Radius With 4400 mm Arm: 5950 mm With 14 ft 5 in. Arm: 19 ft 6 in.

4—Maximum Cutting Height Height With 4400 mm Arm: 13 820 mm With 14 ft 5 in. Arm: 45 ft 4 in. 5—Maximum Dumping Height Height With 4400 mm Arm: 9740 mm With 14 ft 5 in. Arm: 31 ft 11 in. 6—Maximum Digging Depth Depth With 4400 mm Arm: 9570 mm With 14 ft 5 in. Arm: 31 ft 5 in. 7—Maximum Digging Depth (flat Depth With 4400 mm Arm: 9460 mm bottom) With 14 ft 5 in. Arm: 31 ft 0 in. 8—Maximum Vertical Wall Depth With 4400 mm Arm: 8480 mm With 14 ft 5 in. Arm: 27 ft 10 in. 9—Tail Swing Radius Radius With 4400 mm Arm: 4600 mm With 14 ft 5 in. Arm: 15 ft 1 in. DW90712,0000053 –19–22MAY06–2/2 4-10-39 010609 PN=348