Operation—Monitor Operation Selecting an Attachment From Default Screen A.I. 7777.7 h H F1 F2 F 1. When the default screen appears, push button F1 (7) to display the work mode screen. F3 F4 E C 8:01 L / h 17.3 TX1001319 –UN–13DEC05 2. On the work mode screen, push a button located under an attachment to be used in order to select the attachment. 1 2 3 4 5 6 7 8 9 0 F1 F2 F3 F4 NOTE: When the Digging mode is selected, the default screen will reappear. 7 Default Screen 3. On the attachment specification screen, confirm if specification of the installed attachment agrees with that displayed on the screen. Work Mode Dig Breaker 2 2 NOTE: Pushing the back button (12), displays previous screen.
Breaker 1 1 Breaker 3 3 4. Push the select button (11), and the default screen appears. 1 2 3 TX1001687 –19–21DEC05 1 2 3 4 5 7—F1 11—Select Button 12—Back Button 6 7 8 9 0 F1 F2 F3 F4 Work Mode Screen Breaker 1 Maximum Pump Flow Rate 288.0 L/min Maximum Engine Speed Valve Selector O/T Accumulator 1800 min -1 OFF 2-Speed Selector ON OFF 2ndary Hydraulic Relief Selector 11 TX1001690 –19–21DEC05 1 2 3 4 5 12 6 7 8 9 0 F1 F2 F3 F4 Attachment Specification Screen DW90712,000005C –19–24JAN07–1/1 2-2-7 010609 PN=54