Remove and Install Sprocket Track System 1. Lower equipment to the ground and stop engine. 01 0130 2. Remove track chain. (See Remove and Install Lubricated Track Chain in this group.) 72 T132234B –UN–07JUL00 3. Remove sprocket guard. 4. Remove rock guard. (See Remove and Install Rock Guards in this group.) 5. Raise rear of machine using a 9072 kg (10 ton) floor jack and block securely. 1—Sprocket Cap Screws (16 used) CAUTION: The approximate weight of sprocket is 86 kg (190 lb) 6. Install lifting brackets, chain and hoist. Remove sprocket. 7. Install sprocket. 8. Lubricate cap screws with oil and install and tighten cap screws.
Sprocket—Specification Sprocket Cap Screws—Torque 407 (300 lb-ft) ................................... 9. Install sprocket guards. Tighten cap screws. Sprocket Guards—Specification Guards—Torque 129 (95 lb-ft) ............................................................ 10. Install track chain. (See Remove and Install Lubricated Track Chain in this group.) CED,TX03399,6114 –19–10NOV00–1/1 TM1859 (14JUL04) 01-0130-72 700H Crawler Dozer 071404 PN=122