Other Material Drive Axle Housing and Support Number Name Use TY16285 (U.S.) Cure Primer Apply to final drive housing sealing TY9485 (Canadian) surface and cap screws. 7649 (LOCTITE ) T43514 (U.S.) Plastic Gasket Apply to surface of final drive and TY9475 (Canadian) cap screws. 277 (LOCTITE ) 02 0201 2 LOCTITE is a registered trademark of Loctite Corp. TX03399,000186E –19–06OCT00–1/1 Specifications Item Measurement Specification Final Drive Sprocket Weight 86 kg (190 lb) Approximate Final Drive Weight 470 kg (1036 lb) Approximate Final Drive Mounting Cap Screws Torque 320 (235 lb ft) TX03399,0001870 –19–06OCT00–1/1 Remove and Install Final Drive 1. Remove rear cover. 2. Remove track chain.
(See Remove and Install Lubricated Track Chain in Group 0130.) 3. Remove hydrostatic motor. (See Remove and Install Hydrostatic Motor in Group 0300). 4. Raise rear of machine using a 89 000 N (10-ton) floor jack and block securely. Height of rear frame edge should be 609 mm (24 in.). TM1859 (14JUL04) 02-0201-2 700H Crawler Dozer Continued on next page CED,TX03399,5969 –19–10NOV00–1/8 071404 PN=126