John Deere 700H Crawler Dozer — Specifications

Axle Shaft, Bearings, and Reduction Gear Specifications Item Measurement Specification Final Drive Input Shaft End Play 0.076—0.432 mm (0.003—0.017 in.) Final Drive First Idler Cluster Gear End Play 0—0.241 mm (0—0.0095 in.) Final Drive Housing Cap Screws Initial Torque 135 (100 lb-ft) Final Torque 320 (235 lb-ft) Final Drive Pinion Shaft Preload-End Play 0.076 mm (0.003 in.) preload—0.076 mm (0.003 in.) end play Final Drive Secondary Pinion Shaft Torque 73 (54 lb-ft) Cover Cap Screws Axle Retainer Cap Torque 319 (235 lb-ft) Axle Shaft Preload 0—0.127 mm (0.0—0.005 in.) Axle Cover Plate Torque 73 (54 lb-ft) TX03399,0001874 –19–06OCT00–1/1 TM1859 (14JUL04) 02-0250-1 700H Crawler Dozer 071404 PN=131 Other Material Number Name Use TY16285 (U.S.) Cure Primer Apply to final drive housing sealing TY9485 (Canadian) surface, axle shaft retaining plate 7649 (LOCTITE) and cover and brake housing surfaces.

Apply to final drive axle retainer cap screw. T43514 (U.S.) Plastic Gasket Apply to final drive housing sealing TY9475 (Canadian) surface, axle shaft retaining plate 277 (LOCTITE) and cover and brake housing surfaces. LOCTITE is a registered trademark of Loctite Corp. TX03399,0001873 –19–06OCT00–1/1 02 0250 1