John Deere 700H Crawler Dozer — Disassemble and Assemble

Controls Linkage 51. Install steer shaft assembly and two socket head cap screws (4). Tighten cap screws to specifications. Single Lever Control—Specification Steer Shaft Assembly Mounting Cap Screws—Torque 34 (25 lb-ft) ...................................................... 52. Screw steer shaft into rod end (3) and tighten lock nut (1). T119639B –UN–19JAN99 1—Lock Nut 2—Steer Shaft 3—Rod End 4—Socket Head Cap Screw (2 used) Continued on next page CED,TX03399,5977 –19–24MAR00–24/28 TM1859 (14JUL04) 03-0315-23 700H Crawler Dozer 071404 PN=187 NOTE: Steering plate (6) must be installed so that the flat side faces chrome spring (4). 49. Place steering shaft in soft jaw vise.

Install steering plate (6), spring seat (5), spring (4) or (7), spacer (3) spring guide (2) and spring end lock nut (1). Repeat –UN–19JAN99 steps for opposite end, then tighten spring end lock nuts (1) to specifications. Single Lever Control—Specification T119641B Steer Shaft Spring End Lock Nuts—Torque...................................................... 8 N•m (6 lb-ft) (72 lb-in.) 50. Install rod end lock nut (8). 1—Spring End Lock Nut (2 used) 2—Spring Guide (2 used) 3—Spacer (2 used) 4—Springs (Chrome) 5—Spring Seat (2 used) –UN–19JAN99 6—Steering Plate 7—Springs (Gold) 8—Rod End Lock Nut 9—Steer Shaft T119642B CED,TX03399,5977 –19–24MAR00–23/28 03 0315 23