PowerTech 6.8L (6068) John Deere Engine— Use CTM104 Removal and Installation For additional engine information, the component technical manual (CTM) is also required. Use the CTM in conjunction with this machine manual. M44215 –UN–07SEP88 PowerTech is a registered trademark of Deere & Company TX,05,SS3179 –19–13APR99–1/1 TM1859 (14JUL04) 04-0400-3 700H Crawler Dozer 071404 PN=265 Remove and Install Engine CAUTION: Explosive release of fluids from pressurized cooling system can cause serious burns. –UN–23AUG88 Shut off engine. Only remove filler cap when cool enough to touch with bare hands. Slowly loosen cap to first stop to relieve pressure before removing completely. TS281 1.
Remove grille. (See Remove Grille and Remove Grille Housing., in Group 1921.) 2. Drain engine coolant. The approximate capacity of engine coolant is 19.4 L (20 qt). 3. Remove hood.(See Remove and Install Hood, Group 1910.) 4. Remove hood support and engine side shields. (See Remove and Install Hood Support and Engine Side Shields in Group 1910.) 5. Turn battery disconnect switch to OFF and disconnect battery positive cable. 6. Remove grille housing. (See Remove Grille and Remove Grille Housing., in Group 1921.) 7. Remove fan blade, pulley and shroud. (See Remove and Install Fan Blade, Pulley and Shroud, in Group 0510.) 8. Remove fan belt.
Continued on next page CED,TX03399,6007 –19–15NOV00–1/20 04 0400 3