John Deere 700H Crawler Dozer — Install

Radiator and Fan Shroud TM1859 (14JUL04) 05-0510-7 700H Crawler Dozer 071404 PN=291 1—Radiator 10—Recovery/Overflow Tank 19—Washer (8 used) 27—Bracket 2—Radiator Cap 11—Screw (12 used) 20—Radiator Upper Hose 28—Cap Screw (3 used) 3—Drain Valve 12—Clip (3 used) 21—Radiator Lower Hose 29—Washer (3 used) 4—Oil Cooler 13—Cap Screw (3 used) 22—Clamp (4 used) 30—Cap Screw (6 used) 5—Washer (14 used) 14—Radiator Recovery Tube 23—Washer (7 used) 31—Rubber Mount (3 used) 6—Cap Screw (8 used) 15—Radiator Overflow Tube 24—Cap Screw (7 used) 32—Nut (3 used) 7—Cap Screw (8 used) 16—Clamp (3 used) 25—Cap Screw (4 used) 33—Fan Guard 8—Shroud 17—Strip 26—Cap Screw (4 used) 34—Mounting Bracket 9—Washer (8 used) 18—Rubber Mount (4 used) 1.

Install lower rubber mounts (18) on radiator and oil 6. Connect upper and lower radiator hoses (20 and cooler. 21). Connect cooler hoses and coolant over flow tube (15). 2. Using chain and hoist install radiator and oil cooler. 7. Install grille housing. Remove Grille and Remove 3. Install washers (19) and cap screw (25). Tighten Grille Housing. cap screws to specification. 8. Install radiator/oil cooler bracket-to-grille housing Radiator and Oil Cooler—Specification using hardware (29—32). Tighten cap screw (29) to Lower Radiator/Oil Cooler Cap specification. Screws—Torque....................................................... 50 N•m (37 lb-ft) Radiator and Oil Cooler—Specification 4.

If removed, tighten cap screws (6). Upper Radiator/Oil Cooler Bracket-to-Grille Housing Cap Radiator and Oil Cooler—Specification Screw—Torque......................................................... 50 N•m (37 lb-ft) Bracket-to-Radiator and Oil Cooler Cap Screws—Torque.................................... 73 N•m (54 lb-ft) 9. Install spacer, fan and fan guard (33). Tighten cap screws. Radiator and Oil Cooler—Specification Bracket-to-Oil Cooler Cap Radiator and Oil Cooler—Specification Screws—Torque..................................................... 129 N•m (95 lb-ft) Fan Guard Cap Screws— Torque...................................................................... 37 N•m (27 lb- ft) 5.

Install shroud with reservoir. 10. Fill radiator with coolant. (See Fuel and Lubricants Radiator and Oil Cooler—Specification in Section 00, Group 04.) Shroud Cap Screws—Torque.................................. 37 N•m (27 lb- ft) CED,TX03399,6015 –19–24MAR00–2/2 05 0510 7