John Deere 700H Crawler Dozer — Replace DEUTSCH™ Connector

Wiring Harness and Switches F3—10A Start Aid Fuse F1—5A Start Fuse F13—15A Spare Fuse Auxiliary K4—Heater Blower Relay F2—5A Fuel Shut-Off F5—5A Transmission Light/CB K3—Horn Relay Alternator Excitation Fuse Controller Fuse F15—10A Rops (Under Seat) F19—5A Service Expert Fuse F6—5A Monitor/Gauge Fuse F21—10A Spare Fuse Heater Fuse K2—Accessory Relay #1 F14—10A Spare Fuse F20—10A Spare Fuse F16—10A Standard Lights IMPORTANT: Install fuse with correct amperage rating to prevent electrical system damage from overload. The fuse block is located on right side of machine through access cover. CED,TX03399,6041 –19–29MAR00–2/2 Replace DEUTSCH Connector 1.

Select correct size extractor tool for size of wire to be removed: JDG361 Extractor Tool for 12 to 14 gauge wire. JDG362 Extractor Tool for 16 to 18 gauge wire. JDG363 Extractor Tool for 20 gauge wire. TS0124 –UN–23AUG88 2. Start correct size extractor tool over wire at handle (A). DEUTSCH is a trademark of Deutsch Co. CED,OUTX547,149 –19–14APR99–1/5 TM1859 (14JUL04) 16-1674-9 700H Crawler Dozer 071404 PN=367 3. Slide extractor tool rearward along wire until tool tip (A) snaps onto wire. –UN–23AUG88 TS0125 Continued on next page CED,OUTX547,149 –19–14APR99–2/5 16 1674 9